The BEST way to adjust a Classic Volkswagen Type 1 with ball joint front suspension (1966 through 1977), up or down, is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

More Information

(11)

These shocks fit the Classic Volkswagen Type 1 Beetle and Karmann Ghia with a Swing Axle rear suspension. Shock absorbers are without a doubt the brains of your suspension. Nothing influences how your car rides and handles more than its shock absorbers. These shocks measure 13.500" extended and 8.900" collapsed.

Two kinds of shocks are provided for our clients. These shocks replace the factory shocks with part number 113413031.

Sport - Soft riding shock great for a lowered VW.
Adjustable - Tunable shock great for the enthusiast that like to get a specific ride out of their VW.

Made in Mexico | Product updated 6/21/23 by Pete

Typical time to install - 1 Hour | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(13)

Red is back for a Limited Time Only!!!

There is a wing nut that, when functioning at its best, is a FIVE-out-of-TEN experience. This original nut would allow the VW owner to adjust his clutch feel to get the right amount of pedal to disengage the clutch. But most of the time, the OEM German wingnut is no longer on the vehicle, and a Chinese soft nut was chosen, and it feels like a week of not shaving your face. Heck, have you ever tried to adjust it when it was cold outside and you were twisting this wing nut, only for you to miss a twist, and like a propeller, it slaps your finger to the point of you letting out a Go#$&#)$)*_#@)_*$*it!!! Ya, we have all been there. We gave this trick little product a pretty cool name. Yeah, I am biased. We call it the Six Shooter Clutch Adjuster.

Available in Raw Steel, Powder Coated Black, Stainless Steel and NOW, Titanium!!!

Made in the USA | Product updated 1/18/24 by Pete

Typical time to install - 1/2 Hour | Install Guide | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(113)

When installing your Ultimate Beam or factory front end, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Made in the USA | Product updated 6/12/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(9)

When updating the details on your Spring Plate to swing axle tube connections, you could use your old Kamax hardware, okay, OR you can replace it with some detail-oriented stainless steel hardware from the PRO's at Airkewld. You have watched the videos and seen the chassis builds, and now, you can use the same hardware and outfit your Classic Volkswagen with some premium hardware.

Assembled in the USA | Product updated 6/16/23 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(6)

Once you have added the install to your cart, click the following kits that make sense for your build.

1966-1968 - Link
1969-1977 - Link


Register here for the Airkewld Army Price

(5)

Debuting on November 24th, 2023, the PRO's are proud to introduce the PRObuilt Pedal Assembly Service! This is a service of your existing pedal assembly, meaning it can not be purchased outright, no exceptions. It is built on LHD (Left Hand Drive) only.

Once purchased, the PRO's will email you a prepaid shipping label to pay for the shipping of your pedal assembly. You can then drop it off at your local FedEx DropOff location or a Walgreens location near you.

Once received, the PRO's will disassemble the pedal assembly and Ammonia Dip all the components to see the conditions of all parts received. If replacement parts are needed, these parts will be an additional cost. Pedal bushings, spring, pads and hardware are included in the purchase of this service. The OEM Clutch Lever will be reused if possible. If not, a replacement clutch shaft will be supplied with the purchase.

All steel parts will be powder coated satin black and the pedal base will be smoothed out, bead blasted and oil soaked for a clean, sano, finish. All Pedal Builds will have the early Cruiser Pedal conversion, that allows "The Standard" Cruiser pedal to be installed. All standard steel parts will be gun blued.

New Cables are optional. Pictures shown are from our Chassis Builds and only include what is listed above.

More Information


Register here for the Airkewld Army Price

(2)

A collaboration between Ross Wulf and Airkewld, the shift coupler options are not great. But now, a billet constructed coupler with amazing hardware it here! Update your 1964.5 and up Volkswagen Beetle, Bug, Karmann Ghia, Type 3 64.5+ and Bus 68-79.

Made in the USA | Product updated 12/17/25 by Pete

Typical time to install - 1/2 Hour | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price