Dellorto (7mm Banjo Bolt) Hardline Fuel Line Kit - 8081

The Classic Volkswagen engine bay has a problem with fires. You know it. I know it. But what can we do about it? Eliminate connections, fumes, and weak links in the gas system, and eliminate the worry of an engine fire. Sound good?

You just installed your new/rebuilt VW engine, and it is time to connect your dual Delortto with a 7mm threaded banjo bolt. For years is installing some Gates rubber hose and using hose clamps from Autozone. There has to be a more secure way for this fuel system. Airkewld's Stainless Steel Hardline system is here, and you immediately have faith in your fuel system.

Made in the USA | Product updated 12/25/23 by Pete

Related: Six Shooter Clutch Adjuster | Bitchin Bowden's | Slick Spanner

Typical time to install - 2 Hours | Install PDF Link | Install Video | Tools Needed

The kit comes pre-bent with stainless steel .375" tubing that can be cut to length to fit your application. This will do all the fuel lines needed in the engine bay that is not running a stock fuel pump application. You will need a soft line from the back of the tin union to the chassis fuel line outlet.

The kit comes with everything you see in the picture in blue.

• Banjos
• B nuts
• Sleeves
• Tee
• Gauge adapter
• Liquid filled psi gauge
• Tin union with nut
• 2x mandrel bent carb lines
• 1x center line
• 1x drop down line

You will need a cutting device of some kind, we recommend a tubing cutter. You will need a 37 degree flaring tool as well. Check our tool section if you don't already have them.