A better way to lower a Classic Volkswagen Type 1 with ball joint front suspension (1966 through 1977) other than utilizing adjusters in the center of the beam is to order an Ultimate Adjustable Front Beam.

The Ultimate Beam (UB) allows you to adjust your ride height from stock height down to *seven inches on average. The UB has Delrin bushings, a steering dampener bracket, and grease-able zerks. The UB showcased here is six inch narrowed, without shock towers (ultra smooth ride). New torsions, and tie rods, are recommended for the best overall user experience. If you don't know what beam makes the most sense, click here.

There are three ways to lower your 1966 through 1977 Type 1. Good, Better, Best.

Good - Install a pair of adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 12/17/24 by Pete

Typical time to install - 4 Hours | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(2)

A better way to lower a Classic Volkswagen Type 1 with link pin front suspension (1949 through 1965) other than utilizing adjusters in the center of the beam is to order an Ultimate Adjustable Front Beam.

The Ultimate Beam (UB) allows you to adjust your ride height from stock height down to *seven inches on average. The UB has Delrin bushings, a steering dampener bracket, and grease-able zerks. The UB showcased here is six inch narrowed, without shock towers (ultra smooth ride). New torsions, tie rods, and shocks are recommended for the best overall user experience. If you don't know what beam makes the most sense, click here. This beam replaces the factory beam part number 113401021A.

There are three ways to lower your 1949 through 1965 Type 1. Good, Better, Best.

Good - Install a pair of adjusters, based on budget and skill set - no tech support
Better - Install an Ultimate Beam - Tech Support Included
Best - Install an assembled beam like the Stage 1 PRObuilt Beam - Tech Support Included

Made in the USA | Product updated 10/17/24 by Pete

Typical time to install - 4 Hours | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(3)

The BEST way to adjust a Classic Volkswagen Type 1 with ball joint front suspension (1966 through 1977) is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 Shockless PRObuilt Beam is built on the Ultimate Beam platform. It's made six inches narrower than OEM for that low look and to allow for wider wheels, drop spindles, and disc brakes that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here.

Contrary to belief, the shockless beam can ride amazingly when using Airkewld's Delrin bushings. One tip, though, is if the vehicle is adjusted down, the ride will be rough, lift it an inch, and the ride improves.

Made in the USA | Product updated 4/30/24 by Pete

Typical time to install - 2 1/2 Hours | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(2)

The BEST way to adjust a Classic Volkswagen Type 1 with link pin front suspension (1949 through 1965), is by installing a Complete PRObuilt Beam. When the PRO's say complete, they mean complete. You will not need anything in addition to this assembly.

The Stage 1 Shockless PRObuilt Beam is built on the Ultimate Beam platform. It's made six inches narrower than OEM for that low look and to allow for wider wheels, drop spindles, and disc brakes, that add track width.

The complete beam comes as you see it, spindle to spindle, with an entire PRObuilt steering system installed and ready to bolt in and go. For a full list of details included with the beam assembly, visit the Complete Details section here. This beam replaces the factory beam part number 113401021A.

Contrary to belief, the shockless beam can ride amazingly when using Airkewld's Delrin bushings. One tip, though, is if the vehicle is adjusted down, the ride will be rough, lift it an inch, and the ride improves.

Made in the USA | Product updated 4/30/24 by Pete

Typical time to install - 2 1/2 Hours | Install PDF Link | Install Video | Tools Needed

More Information


Register here for the Airkewld Army Price

(1)