Complete Air Ride Kit with Assembled Beam | 1966-1968 Classic VW Type 1 Beetle Ghia

⭐️⭐️⭐️⭐️⭐️ "A complete air ride system that converts your entire Classic VW to air suspension—front and rear—with zero guesswork.

The Right Way to Air Ride a 1966–1968 Volkswagen

The best way to convert a 1966–1968 Classic VW Beetle or Ghia to full air ride is with a Complete PRObuilt Air Ride Kit from Airkewld.

This system replaces the entire torsion-spring suspension—front and rear—with a properly engineered air ride solution designed to work together as one system.

When the PROs say complete, they mean complete.

This kit includes a fully assembled Stage 2 PRObuilt Air Ride Front Axle Beam, a complete swing axle rear air ride conversion, and air management—engineered to eliminate mismatched parts, guesswork, and rework.

Every PRObuilt Air Ride Kit is reviewed by a PRO for correctness before it ships — including beam width, air components, brakes, wheels, and suspension fitment.
If anything needs clarification, we’ll contact you before proceeding.

That’s how air ride stays smooth, predictable, and reliable.

Why This Kit Is Different

Front: Stage 2 PRObuilt Air Ride Beam

At the core of this kit is a Stage 2 PRObuilt Air Ride Front Axle Beam, delivered fully assembled and ready to bolt in.

• Built specifically for ball joint front suspension (1966–1968)

• Premium PRObuilt components throughout

• Satin black powder coating

• Stainless steel hardware

• Designed for correct geometry and 7.5 inches of usable suspension travel

Front beam installation is typically completed in under 4 hours.

Rear: Complete Swing Axle Air Ride Conversion

This kit converts the swing axle rear suspension to air ride using components engineered to work with the front system.

Included rear components:

• Swing axle bracket kit

• 2500 lb air bags

• Short shocks

• Hardware pack

• Printed installation instructions

Rear installation requires welding.

For best results, the PROs recommend removing the body. Body removal typically takes 1–2 hours and greatly improves access, accuracy, and overall installation quality.

Estimated rear install time: 8 hours.

World-Class Ride Quality

This system delivers a ride that’s smooth, controlled, and predictable—aired up or aired out.

• Auto-fill system maintains proper pressure

• When pressure drops below ~165 PSI, the compressor cycles automatically

• Ride height remains consistent without constant adjustment

This isn’t just lower—it’s refined.

Ready to Ship, Ready to Roll

Residential or commercial delivery is available, including lift-gate service.

Why PRObuilt?

PRObuilt systems represent the highest level of refinement we offer.

Premium materials. Stainless hardware. PRO-level assembly.
Every system is verified for correctness before shipping.

What’s Included

Front: Stage 2 PRObuilt Air Ride Beam

• Brand New Front Axle Beam

• PRObuilt Control Arms

• PRObuilt Spindles

• PRObuilt Steering Box

• Premium Tie Rod Ends

• Premium Steering Damper

• Premium Stainless Steel Hardware

• Premium Pneumatic / Sport Shocks

• Complete PRObuilt Steering Components

Rear: Swing Axle Air Ride Kit

• Swing Axle Bracket Kit

• 2500 lb Air Bags

• Short Shocks

• Hardware Pack

• Printed Instructions

Air Management: 4-Valve System

• Compressor

• Pressure Switch

• 2-Gallon Air Tank

• (2) Manual Valves with Gauges

• 1/4" Air Line

• Hardware Pack

• Printed Instructions

Once installed and ride height is set, a 4-wheel alignment is recommended.

PRO’s Recommendations

Beam Width

For most air ride builds, the PROs recommend a 4-inch narrowed beam, which offers the best balance of clearance, travel, and clean fender fitment.

Disc Brakes — Strongly Recommended

Pair this kit with one of our Disc Brake Kits (1966–1968) for improved stopping power and safety.

Want them installed?
Select the Disc Brake Installation (Labor Only) option and the PROs will install them before shipping.

Install Kit

A complete install kit with new beam bolts and body pads is recommended to save time and ensure a clean installation.

Fitment Notes (Important)

• Vehicle must be 12-volt

• Compressor mounting: trunk or under fuel tank (opposite master cylinder)

• Air tank mounting: trunk or under rear seat (opposite battery)

• Valve assemblies: glove box or under dash

FAQs

Is welding required?
Yes. The rear air ride conversion requires welding.

Does the body need to come off?
To do it right, yes. Body removal is strongly recommended and greatly simplifies installation.

Can heater boxes still work?
No. With fabrication, it may be possible, but heater functionality is not supported out of the box.

How long does the rear install take?
Approximately 8 hours.

Will this kit work on a 6-volt car?
No. A 12-volt charging system is required.

Can I run one valve for front and one for rear?
You can, but air will transfer side-to-side in corners. One valve per wheel provides better control and stability.

Tech Support

Airkewld provides tech support for as long as you own the vehicle.

If non-Airkewld air management components are used, we cannot troubleshoot those systems.

Support plans are available for future owners.

The Bottom Line

This isn’t a collection of parts—it’s a complete, PRO-verified air ride conversion for your 1966–1968 Classic VW.

If you want air ride done once, correctly, and without guesswork, this is the kit.