null Skip to main content

Air Ride

Air ride · Mexican Beetle · 1978–2004

Air ride for your
1978–2004 Mexican Beetle

Raise it to drive, drop it to show. Complete front-and-rear kits built for the ball joint front and swing axle rear on your Mexican Beetle, with everything you need to air it up.

Ball joint frontSwing axle rearComplete kits or piece by pieceCall a PRO for setup help

Complete kits from $2,551.03 · Financing available

See the complete kits ↓Call a PRO
What's in a complete kit

Front, rear and air management

Front✓Air sleeve shocks✓Through rod set✓Hardware pack✓Printed instructions
Rear✓Swing axle bracket kit✓2500 lb air bags✓Short shocks✓Hardware pack and printed instructions
Air management✓4-valve air management: 12V compressor, 2-gallon tank, pressure switch, manual valves with gauges, 1/4″ air line, hardware✓Printed instructions

The complete kit with assembled beam swaps the front kit for a fully assembled Stage 2 PRObuilt air ride beam: satin black powder coat, stainless hardware and 7.5″ of usable travel, and it bolts in in about 4 hours.

Before you buy

What to know

WeldingThe rear kit welds on. The front kit does not.
Body offThe PROs recommend pulling the body. It takes 1–2 hours and makes the install far easier.
Install timeAbout 16 hours, or a weekend, for a complete kit. The assembled air beam goes in up front in about 4 hours.
SpindlesDrop spindles get you as low as possible. The assembled air beam comes with them.
BeamThe front kit works with an OEM VW beam or an Airkewld Ultimate or ECObuilt beam.
HeatersHeater boxes won’t work with the air ride installed unless you fabricate around it.
ManagementWe tech-support our own air management. Other brands’ electronic systems can’t be supported.
FAQ

Air ride questions

Which kits fit a Mexican Beetle?

Mexican Beetles share their suspension with the 1966–1968 Beetles: ball joint front and swing axle rear. Every kit here fits.

What’s the difference between the two complete kits?

The kit with the assembled beam gives you a fully built Stage 2 PRObuilt air ride beam up front that bolts in. The other complete kit is the front air ride kit for your existing beam. Both include the rear kit and 4-valve air management.

Is welding required?

The rear kit welds on. The front kit does not. The air management bolts in.

Do I need to take the body off?

To do it right, yes. With a pit or lift it’s easier, but the PROs recommend pulling the body. It only takes 1–2 hours and makes the install much easier.

How long does the install take?

Plan on about 16 hours, or a weekend, for a complete kit. The assembled air beam bolts in up front in about 4 hours.

Will it work with my beam?

The front kit is designed for an OEM VW beam or an Airkewld Ultimate or ECObuilt beam. We can’t tech-support another company’s beam with our kit. Want it bolt-in? Go with the assembled PRObuilt air beam.

Do I need drop spindles?

To get as low as possible, yes. The assembled air beam already has them.

Will my heaters still work?

Not without fabrication. The heater boxes don’t clear once the air ride is in.

Can I use electronic air management?

You can, but we can only tech-support our own air management kits.

Not sure which kit?Call a PRO about your beam, spindles, axles and how low you want to go.
CALL 1-623-518-3537
Review Your Cart Close Close
Your cart is empty

Recently viewed

Social

Recently Viewed Recently Viewed
Social Media Social Media
Top Top