Transmissions & Transaxles
1978–2004 MEXICAN BEETLE · TRANSAXLES
Shift without the grind. Cruise without the scream.
Our transaxle PRO has been building these for 40 years. Most transaxle shops sell you a center section and leave the rest to you. Ours come complete, axles and all, so buying and installing is as simple as we can make it.
Complete with axlesBuilt by a 40 year transaxle PROOEM 12 volt case coreFreeway Flyer or PerformanceStock gearing tops out at 70
From 1949 to 1960, VW used a synchro-less split case transaxle with a 4.37 ring and pinion. Top speed was about 70 mph at 4,000 RPM. Not the greatest on a modern freeway.
When the Super Beetle came along in the 70s, it got a 4.12 or a 3.88 ring and pinion with an overdrive 4th gear, good for the 80s at the same 4,000 RPM. That gearing is where the Freeway Flyer comes from: cruise the freeway at lower RPM.
Then engines got stroked. More horsepower and low-end torque found the weak links in the stock transaxle, so we built the Performance transaxle to fix them.
Cruiser or stroker?
We keep it simple: build to the need, not overbuild for the brochure. No chromoly axles, ribbed cases or custom gear stacks. Pick the one that matches your engine.
Freeway Flyer vs Performance
Both are built on an OEM 12 volt case core with the OEM gear stack. The Performance adds the five upgrades that let a stroked engine put its power down.
| FREEWAY FLYER | PERFORMANCE | |
|---|---|---|
| OEM 12 volt case core | ✓ | ✓ |
| Freeway gearing4.12 ring and pinion · 3.78 · 2.06 · 1.26 · 0.89 | ✓ | ✓ |
| New bearings & synchros | ✓ | ✓ |
| New seals & gaskets | ✓ | ✓ |
| New nose cone seal | ✓ | ✓ |
| New reverse light switchYear specific | ✓ | ✓ |
| German throw-out bearingFor perfect clutch engagement | ✓ | ✓ |
| Painted case | ✓ | ✓ |
| Powder coated axle tubesComplete transaxles | ✓ | ✓ |
| New one-piece German boots, FAG German bearingsComplete transaxles | ✓ | ✓ |
| Checked OEM axlesEvery axle checked for tweaks or bends | ✓ | ✓ |
| Billet brake line clamps readyStock brake line tabs removed for a clean look | ✓ | ✓ |
| New nose cone & hockey stick1950–1959 cars | ✓ | ✓ |
| Super Diff4 spider gears instead of 2 | – | ✓ |
| Steel shift forksReplaces the early brass forks | – | ✓ |
| TIG welded gearsInstead of press fit | – | ✓ |
| Hardened keys | – | ✓ |
| Heavy duty side plateAluminum instead of magnesium. Dials in the thrust. | – | ✓ |
Start with your wheels
Mexican Beetles came with a 1968 style transaxle: long axle, long spline. Short or long, the right axle depends on the wheel you want to run. If your wheel has a certain backspace or offset, the stock axle may not be the one you need. Like our narrowed beams, we can tailor the axles so the fit is perfect. Going to a short axle, short spline gets you deeper wheels with more lip for that look.
Not sure which one?
Tell us your engine, your wheels and how you drive. A PRO will match the transaxle, the axles and the gearing to your build.
START MY ULTIMATE PLANASK A PRO623-518-3537
US Dollars