Hardware Kits & Replacements
1955–1965 KARMANN GHIA · HARDWARE
Retire the wing nut. Meet the Six Shooter.
The factory wing nut clutch adjuster slips, slaps your knuckles and never holds the same feel twice. Six finger pockets, adjust it by hand, no tools. Then finish the rest of your car in stainless.
24,000+ Six Shooters sold500+ 5-star reviewsAdjust by hand, no toolsStainless fastener kits

THE BIGGEST UPGRADE FOR THE SMALLEST PRICE
7mm x 1.0 thread · factory clutch cable · set 1/8" of free play at the top of the pedalPICK YOUR FINISHBlack zincShips ready to install. The crowd favorite.$39.95 →Stainless steelRun anti-seize on every adjustment.$49.95 →Raw steelCoat with paint, oil or anti-seize before install.$29.95 →12 volt clutch cable armStill have the curved 6 volt arm? This replaces it so you can run the Six Shooter$29.95 →Six Shooter install guide →
The Six Shooter
Six pockets, not two tabsTriple the contact points. Your fingers lock into a pocket instead of skidding off a soft tab.
Adjusts by handCold, hot or greasy. No propeller, no knuckle slap, no fishing in the toolbox.
Hard metal, not mushNo soft import nut that strips the first time you crank on it.
Roadside repeatableCount the pockets and dial back to the feel you set on the lift. One pocket is one click of pedal feel.
STAINLESS FASTENER KITS
Finish it in stainless.
You could reuse your old Kamax hardware. Or you can use the same detail-oriented stainless hardware the PROs put on our chassis builds. Kits for the front end, rear, pedals and body.
Same hardware as our chassis buildsKits by areaAnti-seize on every oneREAD THIS FIRSTStainless needs anti-seize. Every time.
All stainless fasteners need anti-seize. Without it, stainless threads can gall and lock up. Put it on every stainless bolt, nut and Six Shooter before it goes on.
STAINLESS FASTENERS & HARDWARE
Kits that fit your car
Every kit below fits your car, sorted by where it goes.
FRONT ENDFront axle beam boltsStainless · 1949–1977$61.55 →Steering box fastener kitStainless · 1962–1977$39.99 →Tie rod jam nut set1949–1977$19.99 →Grub screw / jam nut kit1949–1977$19.95 →Adjustment bolt for adjustable beamReplacement$7.95 →
REAR & TRANSAXLETransmission shoulder bolt setStainless · 1949–1977$111.84 →Swing axle fastener kitStainless · 1949–1968$64.58 →Spring plate cap fastener kitStainless · 1949–1968$19.99 →Rear shock bolt kitStainless · 1953–1968$65.58 →
BEFORE YOU INSTALLGood to knowAnti-seize on all stainless. Every stainless fastener, every time. On the Six Shooter, grease or anti-seize the cable threads and the back face of the nut.Clutch free play. Set 1/8" of free play at the top of the pedal. With the Six Shooter you set it with your fingers, no wrench, and you can dial it right back to the same feel anytime.Plated, not stainless. The flat head socket cap screws are plated steel.Not sure what you need? Ask a PRO and tell us what you're working on.
ALREADY IN THE BOXSix Shooter includedBuying a transaxle? Our transaxle install kits now come upgraded with a black zinc Six Shooter.SEE THE TRANSAXLES
Building the whole car?
Tell us about your car and what you want it to be. A PRO builds your plan: parts, order and budget.
START MY ULTIMATE PLANASK A PRO623-518-3537
US Dollars