Complete PRObuilt Adjustable Ball Joint Front Axle Beam Assembly | Kit Car | Shortened Towers

The Front Beam Built for Ball Joint Kit Cars

Manx-style buggies, clones, and nearly every kit car built on a 1969–1977 Ball Joint VW chassis share the same problem: the body was molded tight around the stock shock towers. Bolt in an off-the-shelf beam and the towers hit the body.

That’s why the PROs build this version of the Complete PRObuilt Front Axle Beam Assembly with shortened shock towers — giving your kit car body the clearance it needs, right out of the box.

When the PROs say complete, they mean it. This beam arrives fully assembled, aligned, and bolt-in ready — so you don’t need to source parts, make guesses, or worry about compatibility.

That’s how premium work stays premium.

Shortened Shock Towers — Why It Matters

Kit car bodies weren’t designed around aftermarket suspension. They were laid up over a stock pan, hugging the original shock towers with almost no room to spare. The result: body contact, cracked fiberglass, and a beam that simply won’t sit right.

Instead of asking you to cut or reshape your body, we shorten the shock towers on the beam itself to create proper clearance. Your body stays untouched, and your beam fits the way it should.

Not sure what your kit car is built on? Note it at checkout and a PRO will confirm fitment before your beam is built.

Why PRObuilt Is Different

Bolt-In & Go

This is a true bolt-in solution. Most installations are completed in under 4 hours with basic hand tools. No cutting, no welding — just remove the old beam and bolt this one in.

Quality You Can Feel

PRObuilt represents the highest level of refinement we offer.

Each beam is built using premium components, German-made parts where it matters, satin black powder coating, and stainless steel hardware throughout — designed to last the life of the vehicle.

You’ll feel the difference immediately in steering response, ride quality, and overall confidence.

World-Class Ride Quality

Designed with proper geometry and 7.5 inches of usable suspension travel, this beam delivers a smooth, controlled ride on the street, the trail, or the sand.

No binding. No harshness. Just refined performance.

Narrowed Correctly — Not Guesswork

Wheel fitment is one of the most misunderstood — and most expensive — mistakes in a kit car build.

Too narrow and you compromise suspension geometry.
Not narrow enough and you fight tire rub forever.

That’s why PRObuilt Beams are available in stock width, 2", 3", and 4" narrowed configurations — without forcing you to guess which one is right.

Have a specific narrowing in mind? You can note it during checkout, and a PRO will confirm it with you before the beam is built.

Ready to Ship, Ready to Roll

Residential or commercial delivery is available at competitive rates, including lift gate and pallet jack service when needed.

Why PRObuilt?

PRObuilt beams represent the most complete and refined assemblies we build.

They feature premium finishes, upgraded materials, and stainless hardware, then receive a final PRO review for correctness before shipping. For kit cars, that review includes confirming your body clears the shortened shock towers.

What’s Included

This is a fully assembled front axle system, not a partial kit.

Included in every Kit Car PRObuilt Beam:

• Brand New Front Axle Beam with Shortened Shock Towers
• PRObuilt Control Arms
• PRObuilt Spindles
• PRObuilt Steering Box
• Premium Tie Rod Ends
• Premium Steering Damper
• Premium Stainless Steel Hardware
• Premium Pneumatic / Sport Shocks
• Complete PRObuilt Steering Components

Once installed and ride height is set, a 4-wheel alignment is recommended to get the most from your PRObuilt Beam.

Optional Add-Ons (Not Required)

The beam is complete and ready to install as-is.
These options are offered for convenience.

Optional Install Kit

Includes new beam bolts and upper/lower body pads — recommended for a faster, cleaner installation.

Optional Disc Brake Installation — PRO Installed (Labor Only)

Upgrade to disc brakes the easy way. Select this option if you plan to add one of our disc brake kits and want the PROs to install it on your beam before it ships.

PRO’s Recommendations

Better Stopping Power:

Pair your PRObuilt Beam with one of our Disc Brake Kits designed for 1969–1977 applications for safer, more consistent braking.

Tighter Steering Feel:

If your steering coupler is worn, replacing it while the beam is out is an easy way to restore precise steering response.

Fitment & FAQs

Tech Support

Airkewld provides tech support for as long as you own the vehicle.
If the vehicle is sold, tech support plans are available for the next owner.

The Bottom Line

This isn’t just a beam — it’s a PRO-verified, premium suspension solution built specifically for Ball Joint kit cars, with shortened shock towers for proper body clearance and the most refined driving experience we offer.