null Skip to main content

Performance Parts

1955–1965 KARMANN GHIA · PERFORMANCE PARTS

Remove the rubber. Remove the fire.

Old rubber fuel lines and hose clamps are the weak link in the most fire-prone place on your VW: the engine bay. Our chassis fuel line kit runs from the tank to the engine. Our stainless hardline kit takes it to the carbs. The combo together is the ticket to avoiding a fire.

No rubber fuel lines-6AN braided chassis lineStainless engine bay hardlinesDual IDF, IDA & Dellorto
THE COMBO

Tank to carbs. Zero rubber.

1TANK TO ENGINEChassis fuel line kit-6AN braided line from the tank, through the tunnel, to the engine. Add a 40 micron filter and a Facet electric pump under the tank so you can retire the mechanical pump.
2ENGINE BAY · DUAL CARBSStainless hardline kitPre-bent .375" stainless lines from the tin to both carbs, with a liquid filled PSI gauge. No rubber hose, no clamps, no fumes in the engine bay.
Remove the rubber fuel lines, remove the chance of fires.
STEP 1 · CHASSIS FUEL LINE KIT

Pick your kit

Four kits, one platform: the same -6AN braided line, with more of the system in the box as you go up. The Facet pump is stocked at auto parts stores nationwide, so a replacement is never far away.

Basic
711 000 930BasicThe braided line, tank to engine.
  • -6AN braided hose
  • -6AN 90° fittings each end
Basic kit$207.70 →
Filter
711 000 931FilterBasic plus a filter you service once a year.
  • Everything in Basic
  • 40 micron inline fuel filter
Filter kit$267.23 →
Pump
711 000 932PumpFilter plus an electric pump on the brake line stand.
  • Everything in Filter
  • Facet 40177N electric pump
  • -6AN tank fitting
  • Wire it to a keyed hot
Pump kit$428.48 →
Deluxe
711 000 933 · FLAGSHIPDeluxeEverything, done once, done quiet.
  • Everything in Pump
  • New brake line stands with rubber isolated pump mounts
  • Mil-spec harness with inline fuse
  • Fuel pump block-off plate
Deluxe kit$624.42 →
STEP 2 · STAINLESS HARDLINE KIT

Pick your carbs

For dual carbs only. Each kit has carb fittings, B-nuts and sleeves, a tee, a gauge adapter, a liquid filled PSI gauge, a tin union with nut, 2 mandrel bent carb lines, a center line and a drop-down line. Cut to length with a tubing cutter and flare with a 37° flaring tool. Black or blue fittings.

IDF Weber
DUAL CARB KITIDF WeberAlso fits Decade carbs and EMPI HPMXBlack$299.99 →Blue$299.99 →
IDA Weber
DUAL CARB KITIDA WeberDual Weber IDABlack$299.99 →Blue$299.99 →
Dellorto
DUAL CARB KITDellortoDual DellortoBlack$299.99 →Blue$299.99 →
WE GET ASKED THIS ALL THE TIMECan I run the hardline kit with my mechanical fuel pump?It can, but it doesn't make sense. With the factory mechanical pump you still have rubber fuel lines that need replacing every five years.Remove the rubber fuel lines, remove the chance of fires.
DON'T SEE YOURS?No kits forDual Solex Dual Kadron Dual Weber ICT 7mm Dellorto Discontinued.Single carb engines The hardline kit only works with dual carbs.
BEFORE YOU INSTALLGood to knowClear the tunnel exits. The factory hardline runs inside the tunnel. Remove it, or trim it and push the ends inside, so the new braided line has clear front and rear exits.Route away from moving parts. Keep the line away from the clutch cable, accelerator cable and shift linkage.Blow it out. Compressed air through the line before every final connection. A grain of grit kills a 40 micron filter fast.Filter direction matters. Tank to pump to filter to carbs. Check the arrow. Service the filter yearly.Sealant on the pump ports only. Every other fitting is -6AN. Sealant on those causes leaks.

Not sure which kit?

Tell us your engine, your carbs and your fuel pump. A PRO will put the right fuel system together for your build.

START MY ULTIMATE PLANASK A PRO623-518-3537
Review Your Cart Close Close
Your cart is empty

Recently viewed

Social

Recently Viewed Recently Viewed
Social Media Social Media
Top Top